PHNIX attended AHR EXPO 2012 in Chicago, U.S. Here are some pictures about the EXPO.
PHNIX, with its Ground Source Heat Pump, Ground Source Heat Pump Triple Refrigeration, Heating, and central hot water Integrated Application solution, beat multitudinous well-known domestic and overseas brands down.
Beijing Renault 4S Shop's room heating, and central hot water comprehensive energy saving solution of this project both use PHNIX large high-end ground source heat pump units.
Experts spoke highly of PHINX for its unremitting efforts on popularization and application of energy efficiency heat pump products in central plains for the past years at Henan Heat Technology Annual Meeting.
Yes. The indoor heat pump on cooling will dehumidify and the resultant water needs to be led away. That is why they are typically mounted on an outside wall. If not, a condensate...
First, you have to consider installation and power supply. The PHNIX hot water heat pump requires 230V, 10amp electrical power to operate. Most natural gas or liquid petrol water heaters do not require electricity.
A ventilation system is designed to ventilate - introduce fresh air into an area. When the introduced air is colder than inside, they can use electric heaters to boost the temperature...
Please check if the main power supply is stable or not, at first because ELS means after transformer, the power supply is too low for CAREL controller ( its standard voltage is 24V and the min. is 20V);
Fuse break, power plug inserted loosely, no electricity in socket, no electricity or connecting wire in the unit loosens.
You can find the corresponding production manual in the technology information download center of the official website.